1/18 VENDETTA TC RTR

DTXD15

Features

¦DuraTrax 1/18 Vendetta TC EP RTR Touring Car 27MHz DTXD15**

¦Chassis: Composite tub style .10" (2.5mm) thick with aluminum front brace for a stiffer, stronger front end

¦Ball Bearings: Full set included, 15 total

¦Drive: 4 wheel, with aluminum driveshaft

¦Motor: Ultra High RPM VR3 380 size, DTXC3309

¦Shocks: Adjustable, filled with 25W oil, medium (Yellow) rate springs and ride height adjusters, shock towers are aluminum with multiplemounting holes for track tuning

¦Radio: Tactic 2-channel AM pistol grip with TR-200 receiver and TSX 200 standard steering servo

¦Speed Control: ESC7500 Electronic, stand-alone with reverse, 1- button setup and heat sink

¦Bumper: Front foam

¦Differentials: Front and rear

¦Body: Trimmed and painted with two position wing for fine tuning downforce to specific track surfaces

¦Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis

¦Camber: Adjustable, front and rear, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle

¦Wheelbase: Adjustable-to change, locate C-shaped clip on the lower outer rear hinge pin, move to front of rear suspension arm to lengthen wheelbase slightly

¦Tires: Slick 1.61 (40.6mm) diameter, .58" (14.7mm) wide

¦Wheels: Dish type, white in 1.29" (32.mm) diameter, .55" (14.4mm) wide

¦Suspension: Fully adjustable ball type

¦Steering: Aluminum drag link for precise steering response

¦Warranty Period: 90 days except for parts covered by the Stress-Tech

¦Guarantee. Stress-Tech parts listed in bold in the parts list have a one year warranty.

Specifications

¦Length: 10.4" (265mm)

¦Width: 4.5" (115mm)

¦Height: 3.3" (85mm)

¦Wheelbase: 6.3" (160mm)

¦Ground Clearance: 3/16" (5mm)

¦Front Track: 4.35" (110.4mm)

¦Rear Track: 4.47" (113.1mm)

¦Front Tread: 3.74 (95.1mm)

¦Rear Tread: 3.91 (98.9mm)

¦Weight: 16.8oz (523g)